Verifone P400
1. You should have already unpacked your card reader and activated your reader in the Chase Merchant Center. If not, visit chase.com/MyPaymentsCenter to complete your activation. Important: Your card reader should remain unplugged and powered off until you’ve completed activating your device in the Chase Merchant Center.
2. Connect Power cables
Connect the dongle cable to the back of the card reader and the power supply to the dongle cable and power source. See diagram below.
Note: The card reader will turn on automatically once it is plugged into a power source.
3. The Merchant Initialization System (MIS) interactive wizard starts automatically after the card reader is fully connected.
4. Connect to Local Wi-Fi Network
Note: The card reader must be connected to the same Wi-Fi network as the POS. For best results and optimal security, we recommend a separate, business-grade router and modem for your payment solution. Your internet provider or local electronics retailer can give you suggestions.
5. Confirm your business details
When the automatic download is complete, review and confirm your details.
Troubleshooting common download errors
6. Setup process completes
